Industrial Camera Downloads

Lumenera's download center provides customers with the most current versions of our software releases. Refer to your User's Manual for instructions on software upgrade procedures, or access our Knowledge Base for instructions.

USB Drivers/Downloads:

Important note for USB based cameras: When downloading a Software Upgrade, note that the software will prompt you to uninstall the previous version of software. You can also uninstall the previous version of the software manually before you download the latest version, but you need to reboot your computer (if prompted) to ensure that you do not experience difficulties with future software upgrades.

LuCam Software v5.0.3

This version of the LuCam Software includes the beta version of our 64-bit camera drivers which can be used in a Windows based-64 bit operating system. It can also be used with the standard Windows based 32-bit operating systems. The installation application will install the appropriate drivers based based on your computer's operating system version.

The latest version of the Lumenera USB Camera LuCam User's Manual is available for download (updated for release 5.0.3). To download please click here.

Linux Drivers and Support

Contact your camera dealer or a Lumenera sales representative at info@lumenera.com for information on the availability of Linux Drivers for Lumenera USB camera models.

National Instruments LabVIEW Plug-in Plug-In v2.0.1

This Lumenera USB 2.0 Camera LabVIEW plug-in allows the creation of LabVIEW VIs that can be used to control all Lumenera USB 2.0 cameras. It supports LabView and Vision Builder AI versions 7.1, 8.0, 8.2 and 8.5 only. This plug-in requires the installation of LabVIEW, the NI Vision Development Module, and the applicable Lumenera Software for your camera model. If you have any questions about LabVIEW, contact National Instruments directly at www.ni.com. If you have any camera specific questions contact our TAC team at support@lumenera.com.

Lumenera USB 2.0 Camera Adaptor for MATLAB Image Acquisition v1.2.0

To install this driver, extract all the files within the compressed zipped file into a directory of your choice. From within MATLAB, select File-> Set Path->Add Folder... In the Add Folder dialog, add the path to the installation location of the Lumenera MATLAB Adaptor. This version of the Lumenera MATLAB Adaptor will work with MATLAB R2006a and onward. It will not work with previous versions of MATLAB.

Imago Photo ID Software v4.2.0

Ethernet Drivers/Downloads:

Network Camera Software v.1.8.1.8 Release Notes

Please ensure that your camera is using firmware 1.8.0.16 or higher before upgrading to version 1.8.1.16. For older firmware, please email support@lumenera.com to obtain all necessary firmware files.
Note: Internet Explorer is required to download the following firmware.

STEP 1: Upgrade boot version
STEP 2: Upgrade main firmware

• Le075 Firmware (color) (mono) (day/night)
• Le165 Firmware (color) (color-day/night) (mono) (mono-day/night)
• Le259 Firmware (color) (mono)
• Le11059 Firmware (color) (mono)

STEP 3: Enable the Watchdog and Save Settings.

Intelligent and Ultra-Wide Dynamic Range Software Release Notes v.2.3.1.6

STEP 1: Upgrade boot version
STEP 2: Upgrade main firmware.

• Le045 (color) (color-day/night) (mono) (mono-day/night)
• Li045 (color) (mono) (day/night)
• Li165 (color) (color-day/night) (mono) (mono-day/night)
• Li175 (color) (color-day/night)
• Li175CA (color) (color-day/night)

STEP 3: Upgrade video analytics firmware

LeCam Client 1.0

To install the LeCam Client application— your computer must have two prerequisite applications installed:

• Microsoft .NET 2.0 framework
• Apple Bonjour for Windows

Bulk Firmware Update Tool (Windows)